Every photo below is from actual testing in my home. No stock photos, no editing, no tricks. These results show what FizzClean can (and can't) do on real toilet stains.

📷 Testing Documentation

All photos taken with consistent lighting and camera angles. Each test shows results after a single FizzClean application (except where multiple applications noted).

Test #1: Hard Water Stains

Difficulty: Moderate | Most Common Problem: Yes

Hard water mineral deposits form white/gray rings at the waterline - the #1 complaint from toilet cleaner users.

Master bathroom hard water stain removal

Master Bathroom - Week-Old Buildup

★★★★★ EXCELLENT

Complete removal of hard water ring with single 20-minute treatment. No scrubbing required - just poured, waited, and flushed.

Application: 1 tablespoon FizzClean
Wait Time: 20 minutes
Scrubbing: None
Water Type: Hard (250+ ppm)
Basement bathroom severe hard water

Basement Bathroom - Month-Old Ring

★★★★☆ VERY GOOD

Older, thicker deposits required overnight treatment for complete removal. Foam penetrated and dissolved calcium buildup that other cleaners couldn't touch.

Application: 1.5 tablespoons FizzClean
Wait Time: Overnight (8 hours)
Scrubbing: Light brushing (30 seconds)
Water Type: Very hard (400+ ppm)

Test #2: Limescale & Mineral Deposits

Difficulty: Moderate to Hard | Common in: Hard water areas

Limescale (calcium carbonate) builds up under the rim and on surfaces, creating rough, crusty patches that trap bacteria and odors.

Limescale removal under toilet rim

Under-Rim Limescale Removal

★★★★★ EXCELLENT

The foam's clinging action worked perfectly here. It stuck to the underside of the rim and dissolved crusty limescale deposits that I couldn't even reach with a brush.

Application: 1 tablespoon FizzClean
Wait Time: 20 minutes
Scrubbing: Brief brush swish
Deposit Age: 2-3 weeks

Test #3: General Grime & Discoloration

Difficulty: Easy | Common in: All toilets

Daily use causes yellowing and dinginess from urine, bacteria, and soap residue - the most common reason people clean toilets.

Dingy toilet before cleaning
BEFORE
Clean toilet after FizzClean
AFTER

Guest Bathroom - Weekly Cleaning

★★★★★ EXCELLENT

This is where FizzClean shines for regular maintenance. Completely restored the bowl to bright white with zero scrubbing. The foam did literally all the work.

Application: 1 tablespoon FizzClean
Wait Time: 20 minutes
Scrubbing: None required
Grime Age: 5-7 days

Test #4: Rust Stains (Iron Deposits)

Difficulty: Hard | Common in: Well water areas

Rust stains (from iron in water) appear as orange/brown streaks. These are notoriously difficult for any cleaner, including FizzClean.

Fresh rust stains

Fresh Rust Stains (2 Weeks Old)

★★★★☆ GOOD

Fresh rust stains lightened significantly with single treatment. Not completely gone, but 80-90% improvement. Second application would likely finish the job.

Application: 1 tablespoon FizzClean
Wait Time: 20 minutes
Scrubbing: Moderate brushing
Rust Age: 2 weeks
Old rust stains before
BEFORE
Old rust stains after
AFTER

Old Rust Stains (3+ Months)

★★★☆☆ FAIR

Honest assessment: Old rust stains are FizzClean's weakness. It lightened them but couldn't completely remove set-in iron deposits. For this specific problem, Clorox Lime & Rust Destroyer works better.

Application: 2 tablespoons FizzClean
Wait Time: Overnight
Scrubbing: Vigorous brushing
Rust Age: 3+ months
Recommendation: Use specialized rust remover

Test #5: Multi-Surface Applications

Versatility Test: Beyond toilets

Testing FizzClean's claim as a multi-purpose cleaner on bathroom sinks and faucets.

Faucet hard water before
BEFORE
Clean faucet after
AFTER

Bathroom Sink Faucet Buildup

★★★★★ EXCELLENT

Mixed FizzClean powder with water to create paste, applied to faucet mineral deposits. After 15 minutes, rinsed clean with no scrubbing. Works as well as CLR for this application.

Application: Paste method (powder + water)
Wait Time: 15 minutes
Scrubbing: None
Surface: Chrome faucet

Gallery Summary: What These Photos Prove

✓ FizzClean Excels At:

  • Hard water stains: 100% removal on week-old deposits, 95% on month-old
  • General grime: Perfect for weekly maintenance with zero scrubbing
  • Limescale: Excellent performance, especially under rim
  • Multi-surface cleaning: Works great on sinks, faucets, tubs

✗ FizzClean Struggles With:

  • Old rust stains: Can lighten but not completely remove heavy iron deposits
  • Heavily neglected toilets: May require 2-3 applications
  • Instant results: Requires 20-minute wait

📊 About These Photos

All photos are from my 30-day testing period, taken with standard lighting and no filters. Each before/after pair shows the same toilet from the same angle for accurate comparison.

Want These Results in Your Bathroom?

Get the same product used for these tests. Currently up to 75% OFF with 30-day guarantee.

⏰ LIMITED TIME: UP TO 75% OFF
Try FizzClean Risk-Free →

✓ Same results you see in these photos | ✓ 30-Day Money-Back Guarantee | ✓ Fast Shipping

📚 Learn More

Read the complete review: Full 30-Day FizzClean Testing Results

Check pricing: Where to Buy FizzClean